cold machining meaning in Chinese
冷机加工
冷加工
冷切削
Examples
- Abandon a cold machine . after six spins , the machine has paid out very little , abandon it
任何机器如若连续六次不出回报，放弃它?另寻一台，以免深陷。 - 5 . after high temperature annealing the hardness of the composites did not reduced obviously until 973k , this temperature greatly exceeds that of pure copper ( after cold machining , the temperature is 423k )
本文制备的材料经高温退火后的硬度明显降低温度点为973k ，大大超过了纯铜（冷加工态）的423k ，而且热稳定性能较好。 - S . the composite prepared has excellent heat stability and high - temperature property . during the course of high temperature annealing , the hardness of the composite does not reduce obviously until 973k , while the temperature of pure copper ( after cold machining ) is 423k in the same conditions
制备的cr _ 2o _ 3 cu复合材料具有良好的热稳定性及高温性能，在高温退火处理过程中，硬度显著降低点的温度为973k ，大大高于纯铜的硬度降低点。